供應綠籬剪

動力型號EngineModel:1E32F 排量Displacement(cc):22.5 化油器Carburetor: 膜片式Pump-filmtype 啟動模式StartMethod: 手拉反沖式啟動HandPullingRecoilStart 燃油Fueloil: 汽油與機油(二沖程專用機油) Gasolineandmachineoil(special一purposetwostrokesmachineoils)25:1 油箱容積Fueltankcontent(L):0.5 傳動方式:自動離心式Turnway:Auto-centrifuge 71片類型/長度Bladetype/length: 單刃Singleblade/750mm 凈重N.W(kg):5.5

2019-03-13 電議

供應割灌機

動力型號〔ngineModel:1E40F-3 排量Displacement(cc):41.5 化油動Carburetor:浮子式Floattype 啟動模式StartMethod: 手拉反沖式啟動HandPullingrecoilstart 燃油「ueloil:汽油與J機油（二沖程專用機油) Gasolineandmachineoil (special-purposetwostrokesmachineoils)25:1 油箱容積Fueltankcontent(L):0.75 較大功率(kw)和轉速(r/min) Max.poweroutput(kw)andrev(r/min):1.4/7000 使用刀片Usingblade: 三齒.四齒.八十齒.尼龍打草器: Three,forty,eightyteeth,nylongrasscutter 操作方式Operatingway: 背式、手提式Hand-lift.Knap-sack 凈重/毛重N.W/G.W(kg):9.0/11

2019-03-13 電議

供應割灌機

動力型號EngineModel:1E36F-2A 排量Displacement(cc):32.5 化油器Carburetor: 膜片式Pump-filmtype 啟動模式StartMethod:手拉反沖式啟動HandPullingrecoilstart 燃油Fueloil:汽油與機油(二沖程專用機油) Gasolineandmachineoil(special-purposetwostrokesmachineoils)25:1 油箱容積Fueltankcontent(L):0.75 較大功率(kw)和轉速(r/min) Max.poweroutput(kw)andrev(r/min):0.9/7000 使用刀片Usingblade: 三齒，四十齒，八十齒，尼龍打草器: Three,forty,eightyteeth,nylongrasscutter 操作方式Operatingway: 側掛式、雙手把(U型)Side-attached,doublebicycle 凈重/毛重N.W/G.W(kg):7.0/10.0

2019-03-13 電議

供應油鋸

汽油機型號Enginemodel:1E50F 動力形式Powertype:單缸*二沖程*強制風冷汽油機 Singlecylinder,two-stroke,air-coolinggasolineengine 缸徑Bore(mm):50 排量Displacement(cc):79 額定功率(kw)及相應轉速(rpm) Ratedpower(kw)andrev(rpm):2.9/6500 燃油「ueloil:汽油與機油(二沖程專用機油) Gasolineandmachineoil (special一purposetwostrokesmachineoils)20:1 啟動模式StartMethod:手拉反沖式啟動HandPullingrecoilstart 點火方式Lgnitionsystem:T.C.I 導板尺寸Guidebarsize:20\" 鏈鋸口徑Sawchainpitch(mm):7.2 凈重N.W(kg):<10.5

2019-03-13 電議

供應高枝鋸

動力型號EngineModel:1E36F-2A 排量Displacement(cc):32.5 化油器Carburetor:膜片式Pump-filmtype 啟動模式StartMethod:手拉反沖式啟動HandPullingrecoilstart 燃油Fueloil:汽油與機油(二沖程專用機油) Gasolineandmachineoil (special一purposetwostrokesmachineoils)25:1 油箱容積Fueltankcontent(L):0.75 較大功率(kw)和轉速(r/min) Max.poweroutput(kw)andrev(r/min):0.9/7000 使用刀片Usingblade: 三齒，四十齒，八十齒，尼龍打草器 Three,forty,eightyteeth,nylongrasscutter 操作方式Operatingway: 可選用工作頭、側掛式、手提式Side-attached,Hand-lift 操作桿長度(高枝鋸)(cm):190 操作桿長度（綠籬剪)(cm):217 凈重/毛重N.W./G.W.(kg):8.5/11.5

2019-03-13 電議

供應噴霧噴粉機

動力型號Enginetype:1E40F 啟動模式StartMethod:手拉反沖式啟動HandPull 較大功率(kw)和轉速(rpm) ingrecoilstart Max.poweroutput(kw)andrev(r/min):1.18/5000 藥箱容積Medicine-chestdimension(L):12 射程Range(m):>11 噴量Spurtcapacity(L/min):>1.5 凈重/毛重N.W/G.W(kg):10.0/11.0

2019-03-13 電議

供應風力滅火機

動力型號EngineModel:6MF-30 形式Type:便攜式Portable 風速Windspeed(m/s)>28 額定轉速Turnspeed(r/min):7000 油箱容積Volumeoffueltank(L):0.89 一次加油連續工作時間 Encourageconsecutingworktimeonce(min):25 凈重N.W(kg):9.5

2019-03-13 電議

供應割草機

動力型號EngineModel:1E36F 排量Displacement(cc):30.5 化油器Carburetor:浮子式floattype 啟動模式StartMethod: 手拉反沖式啟動:HandPullingrecoilstart 燃油:汽油與機油{二沖程專用機油) Fuelof卜Gasolineandmachineoil (special一purposetwostrokesmachineoils)25:1 油箱容積Fueltankcontent(L):0.75 較大功率(kw)和轉速(r/min) Max.poweroutput(kw)andrev(r/min):0.8/7000 使用刀片Usingblade: 三齒，四十齒，八十齒，尼龍打草器 Three，forty,eightyteeth，nylongrasscutter 操作方式Operatingway: 背式、手提式Hand-lift,Knap-sack: 凈重/毛重N.W/G.W(kg):9.0/11

2019-03-13 電議

供應綠籬機

動力型號EngineModel 排量Displacement(cc): 化油器Carburetor 膜片式Pump-filmtype 啟動模式StartMethod 手拉反沖式啟動 HandPullingrecoilstart 燃油Fueloil: :1E32F 22.5 汽油與機油(二沖程專用機油) Gasolineandmachineof} (special一purposetwostrokesmachineoils)25:1 油箱容積Fueltankcontent(L):0.5 傳動方式Turnway:自動離心式Auto-centrifuge 71片類型/長度Bladetype/length: 單刃Singleblade/750mm 凈重N.W(kg):5.5

2019-03-13 電議

供應草坪機

發動機名稱Enginetype:1P68F 缸徑行程BoreStroke(mm):6845 汽缸排量Displacement(ml):163 燃油箱容量Fuelconsumption(L):1.1 壓縮比Compressionratio:8.0:1 額定功率/轉速 Ratedpoweroutput(kw/min)andrev(r/min):2.8/3000 較大扭距/轉速Max.torque(N.m/min)andrev(r/min):8.0/3000 啟動模式StartMethod:手拉反沖式啟動HandPullingrecoi 修剪高度Mowingheight(mm):16-76(10) 潤滑方式Lubricatetype:飛濺Splash 凈重/毛重N.W/G.W(kg):35/38

2019-03-13 電議